Description
A lightweight composite barrier Nonwoven Polyester is used on both sides of Plascore PP Polypropylene Honeycomb. This facing allows the honeycomb to be used in Lite RTM and Full Vacuum Infusion processing. Adding resin pass through holes and flow medium may be required depending on process, part geometry and materials.
Applications
Sandwich structures in Marine, Transportation, Recreational and Industrial-Commercial applications are just a few uses for this material.
Features:
- Lightweight
- High Strength to Weight ratio
- Moisture, Chemical, Corrosion resistant
- Vibration Dampening
- Easy to use
Availability
Infusion Grade PP Polypropylene Honeycomb is available in the following standard dimensions.
Thickness: |
.25″ – 24.0″ |
Densities: |
2.5 pcf – 12.0 pcf |
Tolerances: |
Length: ±.125″ Width: ±.125″ Thickness: ±.02″ Density: ±10% |
Note:
Type may limit these dimensions
Datasheets
Use the buttons below to download related data sheets or log into our Cleanrooms Portal to view additional Cleanroom information. Need access? Contact your sales representative, or register for a Plascore account today.